Ledvance LED Batten Waterproof IP65 120cm for 1x36W LED Tubes (EM/UN)
Specifications Ledvance LED Batten Waterproof IP65 120cm for 1x36W LED Tubes (EM/UN)
|Manufacturer Name||DAMP PROOF HOUSING 1200 1x Lamp IP65|
|Energy efficiency class||A||
The European Union has drawn up guidelines for energy labels for lighting. The energy efficiency of bulbs and luminaires is expressed in classes (A to G). Energy label A is the most efficient and energy label G the least. The energy label is also stated on the packaging of a product.
|Energy efficiency class old||A|
|Average Lifetime (h)||30000|
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|Suitable for Outdoor||Yes|
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|Impact Protection (IK)||IK08||
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
|Operating Temperature||-30 till + 40|
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
Lighting with a sensor or twilight switch only lights up when it receives a certain signal. This reduces energy costs. The (built-in) sensors react to darkness and/or movement.
Need help?Contact our light specialists for free advice.
The product is added to your shopping cart.
Your request has been successfully sent!
Our sales team will now contact you shortly. Together with you, we will collect your data and talk about your personal advantages. Thank you for your trust!
We are sorry
Unfortunately you can only request a quotation if you are an installer or a company. You can always use the special tier discounts for our products.