Noxion LED Batten Extrusion 20W 2200lm - 865 Daylight | 70cm
Specifications Noxion LED Batten Extrusion 20W 2200lm - 865 Daylight | 70cm
|Noxion LED TL Waterproof Extrusion 20W 6500K 700mm (2x18W eqv.)
|Any Lamp all-in warranty
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 5 years.
|Average Lifetime (h)
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|Colour temperature (Kelvin)
|6500K - Daylight
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
|Colour Rendering (Ra)
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|Luminous Flux (Lumen)
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|Lumen per watt
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
|Beam Angle (degree)
A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.
The power factor indicates how efficiently a luminaire uses electricity. The rule is: the higher the power factor, the more efficient the power consumption. A product with a high power factor (0.85 - 0.95) is also the safest. This is because the amount of unnecessary power consumption (blind current) is very limited.
|Suitable for Outdoor
|Product Type Category
|LED Waterproof Batten
This filter allows you to refine your search by selecting specific types of light sources. Choose from options such as LED bulbs, LED tubes, or LED spots to find the perfect lighting solution for your needs.
|Screw [Screw connector]
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|Impact Protection (IK)
|IK08 - 5 joules
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
|-15 to +45
|Colour of the Fixture
|Colour of material
|No Emergency Unit
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
Lighting with a sensor or twilight switch only lights up when it receives a certain signal. This reduces energy costs. The (built-in) sensors react to darkness and/or movement.
|Type of sensor
Description Noxion LED Batten Extrusion 20W 2200lm - 865 Daylight | 70cm
- Industries, warehouses, tunnels, parking garages, sport centers, car wash
- Easy & quick installation
- Replaces fixtures of 2x18W
- Save up to 45% energy
- Energy usage of 20W
- Lifespan: 35.000 hours
- Can handle temperatures from 15 till +45 C
- Waterproof: IP66
- Colour temperature: 6500K
- Light output: 2200 lm
- 3 year guarantee
Noxion LED Batten is a waterproof luminare with a high lumen output. Therefore it is a perfect light solution for industries, warehouses, tunnels, parking garages, sport centers, car washes etc. Lighting in these environments need to be on for most of the day which is why switching to an energy efficient will benefit your overall operation cost. Replace your old fluorescent fixtures with the Noxion LED batten and you save both energy and improve the quality of light at the same time.
Easy and quick installation
This LED batten is easy to install. The installation is easy and fast since you only need a screwdriver. The LED-light is flicker-free, unlike traditional fluorescent tubes. The luminaire has an unbeatable price considering its high quality. Switching to sustainable LED is therefore possible regardless of budget.
Save energy with LED
Compared to standard fluorescent fixtures, this luminaire consume less energy. It replaces fluorescent fixtures of 2x18W. This luminaire uses only 20W. This is an energy saving of 16W which means an energy saving of 45% per fixture.
Life span 35.000 hours
This product have a lifespan of 35.000 hours. If the light is on 12 hours a day five days a week, it’s 60 hours per week. In one year, the light is on for 3120 hours. If we split the expected life span with the annual consumption we get a product which lasts for more than 11 years.
Withstands temperatures between -15 and +45 degrees C
This luminaire is produced and designed to withstand temperatures between -15 degrees C up to +45 degrees Celsius. The fixture is waterproof with an IP66 and impact resistant with an IK08.
Color temperature is measured in Kelvin and indicates the colour of the light. Light can shift from a very warm, almost red light color to a colder, white-blue color. These products have a color temperature of 6500K which is a very cold white light, similar to daylight.
Light output: 2200 lm
The conventional light sources usually experience a loss of light quality after 10.000 hours. Noxion LED batten continuously keep a high quality light and the same light output throughout its lifetime. Compared to fluorescent tubes you need to choose your led-fixture depending on the amount of lumen, not their wattage, since lumen determine the fixtures light output/brightness. Lumen is equal to brightness.
3 year warranty
This Noxion Batten is a robust and reliable high quality luminaire. Due to the high-quality integrated components of the products, Noxion is able to give a 3 year warranty. If you have any questions after reading this information, you are welcome to contact our light advisers and we will help you.