Noxion LED Bulkhead Core with Sensor 840 20W Grey | Replaces 2x26W
Need help?Contact our light specialists for free advice.
Specifications Noxion LED Bulkhead Core with Sensor 840 20W Grey | Replaces 2x26W
|Noxion LED Bulkhead Core Wall/Ceiling 20W 4000K Grey Round Sensor Ø360mm (2x26W equivalent)
|Any Lamp all-in warranty
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 5 years.
|Average Lifetime (h)
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|Colour temperature (Kelvin)
|4000K - Cool White
|840 Cool White
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
|Colour Rendering (Ra)
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|Luminous Flux (Lumen)
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|Lumen per watt
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
|Beam Angle (degree)
A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.
The power factor indicates how efficiently a luminaire uses electricity. The rule is: the higher the power factor, the more efficient the power consumption. A product with a high power factor (0.85 - 0.95) is also the safest. This is because the amount of unnecessary power consumption (blind current) is very limited.
|Product Type Category
This filter allows you to refine your search by selecting specific types of light sources. Choose from options such as LED bulbs, LED tubes, or LED spots to find the perfect lighting solution for your needs.
|Screw [Screw connector]
|Unified Glare Rating
The Unified Glare Rating (UGR) indicates the extent to which the light of a product is blinding. This value differs per application and must comply with European standards (EN 12464-1). A low UGR value stands for a low glare factor. For offices and schools lighting with a UGR<19 value is mandatory and for public areas UGR<22.
|Suitable for Outdoor
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|Impact Protection (IK)
|IK08 - 5 joules
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
|-25 to +45
|Colour of the Fixture
|Colour of material
|No Emergency Unit
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
Lighting with a sensor or twilight switch only lights up when it receives a certain signal. This reduces energy costs. The (built-in) sensors react to darkness and/or movement.
|Type of sensor
|Light Sensor, Motion Sensor
|Sensor Reach (m)
Description Noxion LED Bulkhead Core with Sensor 840 20W Grey | Replaces 2x26W
- Up to 70% energy savings
- Average lifespan : 35,000 hours
- Energy efficiency class : A ++
- No loss of brightness
- Motion sensor and twilight switch integrated
- Color temperature : warm white
- Without flicker
- IP66 - indoor and outdoor lighting
- IK 08 - Impacts and vandalism proof
- No maintenance
- 3 years warranty
Up to 70% energy savings
The most modern LED technology allows significant energy savings up to 70%, compared to conventional luminaires. For example, fluorescent fixtures with 2 x 26 watts consume 52 watts, to which should be added 8 watts for the energy consumption of the ballast. In total, a fluorescent fixture with these characteristics consumes 60 watts. This LED lighting solution with the same characteristics only consumes 20 watts, saving up to 70% in energy.
Average lifetime : 35,000 hours
This Noxion LED wall mounted fixture has an average lifespan of 35,000 hours. If we consider that your fixture will be on around 12 hours a day, 5 days a week, 60 hours will be used every week. One year counts 52 weeks, so we will reach 3120 hours of use for your luminaire on a whole year (52 weeks x 60 hours). You will not have to worry about your fixture before 10 years.
Energy class efficiency : A ++
This LED wall and ceiling fixture has the highest energy efficiency class possible: A ++. Thanks to this, we can guarantee significant energy savings, as well as a reduction of emissions and impact on the environment for the user.
No loss of brightness
Fluorescent lighting tend to lose its light intensity after 10,000 hours (example: fluorescent tubes). This Noxion LED product will maintain its brightness throughout its life. This, thanks to the high quality materials and components used. This product has high light performance: 2125 lumens for a ratio lumen / watt of 106.
Motion sensor and twilight switch integrated
This luminaire is equipped with a motion sensor and a twilight switch. These functions ensure the energy optimization of the luminaire. The motion sensor allows the luminaire to turn on only when movement is detected. The twilight switch intervenes when the visibility is reduced. These built-in sensors detect 360 ° movements, up to 8 meters around.
Colour temperature : cool white
The cool white color (4000 Kelvin) offers great possibilities. It is ideal for lighting entrances, corridors and as general lighting. It allows to create a fresh and productive atmosphere.
The LED technology of this luminaire, combined with the experience of Noxion in the industry, ensures the homogeneity and reliability of the product. Unlike older fluorescent fixtures, which can cause headaches, this Noxion LED product is subjected to the most strict safety test to ensure there is no flicker. Indeed, fluorescent tubes for example, flicker about 50 times per second. Even if you do not see these flickers, your brain detects them. Flicker-free LED lighting enhances your productivity and concentration.
IP66 - indoor and outdoor lighting
This luminaire is suitable for lighting indoor and outdoor environments thanks to the high degree of protection against dust and water (IP). The first digit indicates the protection against the entry of solid bodies (dust) between 0 and 6, the second indicates the protection against the entry of liquid bodies (water) between 0 and 8.
IK 08 - impacts and vandalism proof
The high resistance index to mechanical shock (shown on a scale of 1 to 10) ensures good protection against vandalism or accidental damage of your product.
Conventional lighting (e.g neons) can be expensive in the short term as they involve the frequent replacement of certain parts. This LED Noxion wall fixture has no need for maintenance.
3 years warranty
Thanks to the experience of Noxion in lighting and the judicious choice of materials and components of this product, we are able to provide you with a 3-year warranty on this product.