Noxion LED Downlight Opto 12W 1200lm 90D - 830 Warm White | 129mm - IP40
The product is added to your wishlist!
Specifications Noxion LED Downlight Opto 12W 1200lm 90D - 830 Warm White | 129mm - IP40
|Manufacturer Name||Noxion LED Downlight Opto 12W 1200lm 3000K Cutout Ø120mm Frame Ø129mm|
|Any Lamp all-in warranty||5 Years||
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 7 years.
|Energy efficiency class||E||
Every bulb or fixture has an energy efficiency class A to G. Energy label A is the most efficient and G the least. LED lighting is the most sustainable lighting technique. Even if a LED bulb is rated E or lower, they still save 70% of energy compared to conventional lighting with the same energy label. Why is it the same label then? To motivate LED brands to get even more durable.
|Energy efficiency class old||A++|
|Average Lifetime (h)||70000|
|Emergency Lighting||No Emergency Unit||
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
|Conventional fixture equivalent||2 x 18W|
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|Colour temperature (Kelvin)||3000K - Warm White||
Light colour is also known as colour temperature and is expressed in Kelvin (K). You can choose from:
|Colour Code||830 Warm White||
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
|Colour Rendering (Ra)||80-89||
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|Beam Angle (degree)||90||
A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.
|Luminous Flux (Lumen)||1200||
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|Lumen per watt||100||
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
The power factor indicates how efficiently a luminaire uses electricity. The rule is: the higher the power factor, the more efficient the power consumption. A product with a high power factor (0.85 - 0.95) is also the safest. This is because the amount of unnecessary power consumption (blind current) is very limited.
|Installation Depth (mm)||70|
|Optical Cover||PC (Polycarbonate)|
|Suitable for Outdoor||Yes|
|Finish of Reflector||PC (Polycarbonate)|
|Cut out (mm)||120|
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|Operating Temperature||-20 to +45|
|Colour of the Fixture||Black|
Lighting with a sensor or twilight switch only lights up when it receives a certain signal. This reduces energy costs. The (built-in) sensors react to darkness and/or movement.
Description Noxion LED Downlight Opto 12W 1200lm 90D - 830 Warm White | 129mm - IP40
- LED integrated downlight
- Energy-efficient replacement
- Long lifetime
- IP40: protection against solid substances smaller than 1 mm
- Beam angle of 90º
- Colour temperature: 3000 Kelvin
LED integrated downlight
This downlight doesn’t work with a separate light source. The LED technology is integrated into the fixture itself. The light works on 220-240V and has an included driver. The power factor is 0.95, which means that the light has very little reactive current. Another advantage of using LED light is that it doesn’t flicker. The quality of LED light is better than any light source. Flickering light can cause headaches or migraine. This LED light doesn’t flicker and reaches 1200 lumens instantly.
This fixture is very energy-efficient. Not just because of the power factor, but also because of the low wattage. This light uses 12 watts but replaces a light of 36 watts.
With a lifetime of 70,000 hours, this fixture will last very long. When used in work environments, 8 hours a day, five days a week, the lifetime is over 30 years! The first five years, you are certain of a correct working fixture because of the Any-Lamp all-in warranty.
IP40: protection against solid substances smaller than 1 mm
The IP rating of a fixture shows how well it is protected against fluid and solid substances. This fixture is protected against small, solid substances.
Beam angle of 90º
With a beam angle of 90º, this product is suitable for general lighting. If used equally across a room, these fixtures will give a nice, even lighting.
Colour temperature: 3000 Kelvin
The warm light of this fixture had a colour temperature of 3000 Kelvin. We recommend you to use this in stairs, hallways or entrances since it is a warming and welcoming color.
Need help?Contact our light specialists for free advice.
The product is added to your shopping cart.
Your request has been successfully sent!
Our sales team will now contact you shortly. Together with you, we will collect your data and talk about your personal advantages. Thank you for your trust!
We are sorry
Unfortunately you can only request a quotation if you are an installer or a company. You can always use the special tier discounts for our products.