Noxion LED Highbay Pro HACCP 200W 24000lm 90D | DALI - Replaces 400W
Need help?Contact our light specialists for free advice.
Specifications Noxion LED Highbay Pro HACCP 200W 24000lm 90D | DALI - Replaces 400W
|Noxion LED Highbay Pro-Clean (HACCP) 200W 4000K CRI >80 90° DALI Grey (400W eqv.)
|Any Lamp all-in warranty
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 5 years.
|Average Lifetime (h)
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
|Colour temperature (Kelvin)
|4000K - Cool White
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
|840 Cool White
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
|Colour Rendering (Ra)
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|Beam Angle (degree)
A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.
|Luminous Flux (Lumen)
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|Lumen per watt
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
The power factor indicates how efficiently a luminaire uses electricity. The rule is: the higher the power factor, the more efficient the power consumption. A product with a high power factor (0.85 - 0.95) is also the safest. This is because the amount of unnecessary power consumption (blind current) is very limited.
|Product Type Category
This filter allows you to refine your search by selecting specific types of light sources. Choose from options such as LED bulbs, LED tubes, or LED spots to find the perfect lighting solution for your needs.
|PI [Push-in connector 3-pole]
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|Impact Protection (IK)
|IK10 - 20 joules
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
|-30 to +40
|Colour of the Fixture
|Colour of material
|Suitable for Outdoor
Lighting with a sensor or twilight switch only lights up when it receives a certain signal. This reduces energy costs. The (built-in) sensors react to darkness and/or movement.
|Type of sensor
Description Noxion LED Highbay Pro HACCP 200W 24000lm 90D | DALI - Replaces 400W
- Energy saving up to 50%
- Long lifetime with warranty
- Beam angle of 90º
- DALI dimmable
- High IP rating
- High IK rating
- ProClean design
- Cool white light
Energy saving up to 50%
Replacing a HID or HQL gas discharge lamp with these LED high bays will save you up to 50% energy. This LED high bay is an energy label A++ product, which means that it is very energy efficient. It uses 200W and replaces a conventional fixture of 400W.
Long lifetime with warranty
The very long lifetime of 80.000 hours is a proof of the excellent quality of this product. In a working environment, this light will be used 10 hours a day, five days a week. This is 2600 hours per year. In this scenario, the light can be used over 30 years! The first five years after purchase, you receive Any-Lamp All-in warranty.
Beam angle of 90º
With a beam angle of 90º, this product directs light in the direction you need: downwards. This is extra energy effeciënt.
This highbay is dimmable with the DALI system. The DALI system is a worldwide standard in lighting control, that uses one interface to control all light sources.
High IP rating
An IP rating of 66 means that this fixture is suitable to be used outside. The fixture has the highest protection for liquids, as water, and solids, as dust.
High IK rating
The IK rating indicated how well a fixture is protected to shocks or vandalism. An IK rating of 10 is the highest possible. This fixture isn’t easily broken, even if it gets a shock.
This fixture has a ProClean design. Which means that it is dust proof. The unique design ensures no dust settles on the luminaire, which makes maintenance unnecessary.
Cool white light
The cool white light of this high bay is mostly used in industry, warehouses, gas stations or supermarkets.