Noxion LED Panel Econox 32W 3900lm - 830 Warm White | 120x30cm - UGR <22 - Philips Xitanium Driver - Replaces 2x36W
Need help?
Contact our light specialists for free advice.Specifications Noxion LED Panel Econox 32W 3900lm - 830 Warm White | 120x30cm - UGR <22 - Philips Xitanium Driver - Replaces 2x36W
General Information
| SKU | 237847 | |
|---|---|---|
| Manufacturer Name | NEW Noxion LED Panel Econox 32W 3900 lm 3000K 300x 1200 | |
| Any Lamp all-in warranty | 7 Years |
i
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 7 years.
|
| Energy efficiency class | D |
i
Every bulb or fixture has an energy efficiency class A to G. Energy label A is the most efficient and G the least. LED lighting is the most sustainable lighting technique. Even if a LED bulb is rated E or lower, they still save 70% of energy compared to conventional lighting with the same energy label. Why is it the same label then? To motivate LED brands to get even more durable.
|
| Energy efficiency class old | A+ | |
| Average Lifetime (h) | 70000 |
Technical Information
| Technology | LED Integrated |
i
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
|
|---|---|---|
| Replaces (Watt) | 2x36 |
i
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
|
| Wattage | 32 |
i
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
|
| Voltage (V) | 220-240 |
i
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
|
| Dimmable | Not Dimmable |
i
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|
| Colour temperature (Kelvin) | 3000K - Warm White |
i
Light colour is also known as colour temperature and is expressed in Kelvin (K). You can choose from:
|
| Colour Code | 830 Warm White |
i
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
|
| Colour Rendering (Ra) | 80-89 |
i
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|
| Beam Angle (degree) | 120 |
i
A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.
|
| Luminous Flux (Lumen) | 3900 |
i
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|
| Lumen per watt | 125 |
i
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
|
| IP-Rating | IP20 |
i
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|
| Impact Protection (IK) | IK02 |
i
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
|
| Fixture Connection | GST18i3 (2x1mm) male 0.5m | |
| Driver Included | Yes | |
| Power factor | >0.90 |
i
The power factor indicates how efficiently a luminaire uses electricity. The rule is: the higher the power factor, the more efficient the power consumption. A product with a high power factor (0.85 - 0.95) is also the safest. This is because the amount of unnecessary power consumption (blind current) is very limited.
|
Fixture Information
| EAN | 8719157011945 | |
|---|---|---|
| Mounting Method | Recessed | |
| Unified Glare Rating | < 22 |
i
The Unified Glare Rating (UGR) indicates the extent to which the light of a product is blinding. This value differs per application and must comply with European standards (EN 12464-1). A low UGR value stands for a low glare factor. For offices and schools lighting with a UGR<19 value is mandatory and for public areas UGR<22.
|
| Optical Cover | PS (Polystyrene) | |
| Operating Temperature | -10 to +40 | |
| Emergency Lighting | No Emergency Unit |
i
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
|
| Colour of the Fixture | White | |
| Housing | PS (Polystyrene) |
Dimensions
| LED panel size | 120x30cm |
i
The most common sizes of LED panels are 60x60cm (square) and 30x120cm (rectangular). These are standard sizes for almost all suspended ceilings. There are also various other dimensions available, such as 20x120cm or 15x150cm.
|
|---|---|---|
| Length (mm) | 1195 |
i
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
|
| Width (mm) | 295 | |
| Height (mm) | 32 |
Downloads
