Noxion LED Bulkhead Pro with Sensor 830 13W Grey | Replaces 2x18W
Need help?Contact our light specialists for free advice.
Specifications Noxion LED Bulkhead Pro with Sensor 830 13W Grey | Replaces 2x18W
|Noxion LED Bulkhead Core Wall/Ceiling 13W 3000K Grey Round Sensor Ø301mm (2x18W eqv.)
|Any Lamp all-in warranty
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 5 years.
|Average Lifetime (h)
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|Colour temperature (Kelvin)
|3000K - Warm White
|830 Warm White
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
|Colour Rendering (Ra)
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|Luminous Flux (Lumen)
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|Lumen per watt
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
|Beam Angle (degree)
A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.
The power factor indicates how efficiently a luminaire uses electricity. The rule is: the higher the power factor, the more efficient the power consumption. A product with a high power factor (0.85 - 0.95) is also the safest. This is because the amount of unnecessary power consumption (blind current) is very limited.
|Product Type Category
This filter allows you to refine your search by selecting specific types of light sources. Choose from options such as LED bulbs, LED tubes, or LED spots to find the perfect lighting solution for your needs.
|PI [Push-in connector 3-pole]
|Suitable for Outdoor
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|Impact Protection (IK)
|IK10 - 20 joules
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
|-30 to +40
|Colour of the Fixture
|Colour of material
|No Emergency Unit
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
Lighting with a sensor or twilight switch only lights up when it receives a certain signal. This reduces energy costs. The (built-in) sensors react to darkness and/or movement.
|Type of sensor
|Light Sensor, Motion Sensor
|Sensor Reach (m)
Description Noxion LED Bulkhead Pro with Sensor 830 13W Grey | Replaces 2x18W
- Up to 70% energy savings
- Long life-cycle: 35.000 hours
- Energy class A+
- Motion and twilight sensor
- High light output 1050
- Colour temperature warm white
- Flicker-free light
- IP66: water and dust protected
- IK10: impact and vandalism protected
- Polycarbonate housing
- No maintenance
- Low environmental impact
- 3 years all-in warranty
Up to 70% energy savings
The Core Pro line of Noxion bulkheads integrates the most advanced LED technologies and offers an energy saving up to 70% compared to conventional fixtures. For instance, a PL-C light source of 2x18W consumes 36 watt. In addition to this consumption, there is the energy consumption of the ballast. Overall, a light fixture with these features will use 44 watt. With this LED light source you will be able to save up to 70% on energy costs!
Long life-cycle: 35.000 hours
This Noxion high-quality product lasts up to 35.000 hours. With a daily use of 12 hours for 5 days a week, you will not have to replace this light source for at least 11 years.
Energy class A+
This Noxion LED bulkhead exhibits a high energy class. This will guarantee high energy saving and lower impact on the environment.
Motion and twilight sensor
A bulkhead with a motion and day-night sensor will help optimize energy consumption as the light will turn on and off automatically. The motion sensor can detect movement up to 8 meters at 360°. The twilight switch will automatically turn on the light when there is a low amount of natural light. Read more here.
High light output 1050 lumen
Most conventional light sources experience lower brightness after 10.000 burning hours. Noxion LED fixtures keep the same light performance all over the product life cycle due to its top of the line components and materials. More specifically, this Noxion LED bulkhead offers a light output of 1050 lumen distributed in 120° and an efficiency of 80 lumen/watt.
Colour temperature warm white
The colour temperature warm white is ideal for creating a warm and welcoming ambience. Therefore, it is suitable for a use in halls, corridors, staircases and for general lighting. Find out more here about the perfect colour temperature for each area of application.
Thanks to Noxion long experience in lighting and the efficiency of LED technology, the light output of the CorePro product line is uniform and reliable. Compared to old CFL fixtures which may cause headache, eye irritation and general tiredness, Noxion LED products are subject to strict safety tests to guarantee a flicker-free and high-quality light that will help to enhance productivity and concentration in workplaces.
IP66: water and dust protected
This light fixture is suitable for outdoor use in damp areas due to its good dust and water protection. More specifically, the first number after IP refers to ingress protection from solids (from 0 to 6) and the second digit is used for measuring the liquid ingress protection.
IK10: impact and vandalism proof
This Noxion LED batten has a high protection against accidental damages or vandalism actions. This will help to extend its lifespan, ensuring a quick return on your investment.
Noxion Bulkhead Core Pro is made of polycarbonate, which is a light and highly resistant material. To this extent, this light fixture ensures high light performance both at high and low temperatures (from +40° to -30°).
A conventional light fixture can be expensive in the short term because of the frequent replacement of some of its components, like the starter or the ballast. Noxion LED lights, on the other hand, do not require any maintenance and provide a constant and uniform light output all over the life cycle.
Low environmental impact
LED light sources do not contain any mercury or potentially harmful gases and do not emit UV and IR rays. Therefore, these lights do not pose a threat to either our body or the environment. Furthermore, these light produce the same light output but with a lower energy consumption. Therefore, by choosing LED light sources you will lower your energy bills and help protect the environment.
3 years warranty
This Noxion LED product is made of the finest quality materials and components. Thus, it is covered by a 3 years all-in warranty.
Are you looking for a bulkhead with emergency unit?
A bulkhead with an emergency unit will guarantee an emergency light up to 3 hours in case of black-outs. This can play a key role for ensuring safety in public or private buildings. Find here bulkheads with emergency units.